Wiring Diagram

Circuit » Home » RELAY » RELAY DESIGN » RELAY GRAPHIC » SWITCH » SWITCH DARK » SWITCH DARK CIRCUIT » SWITCH DARK DIAGRAM » SWITCH LIGHT » SWITCH LIGHT CIRCUIT » SWITCH LIGHTDIAGRAM » LIGHT-DARK SWITCH WITH RELAY SCHEMATIC DIAGRAM

---

LIGHT-DARK SWITCH WITH RELAY SCHEMATIC DIAGRAM

As you may have notice, the 741 is connected as a voltage comparator. Two voltage dividers are easy to be found: The first one is the10K resistor and the LDR . The second one is composed by the two 470 Ohms resistors and the potentiometer. Both the outputs of the dividers are connected as inputs to the voltage comparator.

The second voltage divider will settle the reference voltage. The first voltage comparator that contains the LDR, will change it's voltage according to the light level. When the voltage across the negative input of the comparator is less than the voltage to the positive input of the comparator, the output is held low. When the voltage on the negative input rises, there will be a time that it becomes greater than or equal to the positive (pre-selected) voltage, and then the output becomes high and the relay through the 2N2222 is actuated.